Advanced Personnel Profiles
Staffing & Recruiting Since 1995
Senior Software
Engineer – Valencia, CA
Apply
your creativity and passion to develop innovative medical devices and digital
health solutions that can greatly improve patients' lives. Company is an
innovative digital health and advanced neuromodulation company pioneering
closed-loop, wearable neuromodulation therapies. You will develop firmware
coding, integration of hardware and software systems and software testing.
∙ Bachelor’s degree in Computer Science, Electrical or Systems
Engineering
∙ 5-7 years of experience, including at least 2 years working in
medical devices
∙ Solid C/C++ programming experience on 32-bit microprocessor embedded
platforms
Contact Pat Jacobs — 805-579-0630 pat.jacobs@advancedpersonnelprofiles.com
Sr.
Manufacturing Engineer – Goleta, CA
Company
is searching for a manufacturing engineer with 3 to 5 years of experience.
Should have experience with low volume, high-tech products.
∙ CAD design experience
∙ GD & T strong understanding
∙ Experience with ERP systems and complex BOMs
∙ Experience with DFx, DFMEA, PFMEA
Contact Pat Jacobs — 805-579-0630 pat.jacobs@advancedpersonnelprofiles.com
Sr. Neuromodulation
Engineer – Valencia
Apply
your creativity and passion to develop innovative medical devices and digital
health solutions that can greatly improve patients' lives. Company is an
innovative digital health and advanced neuromodulation company pioneering
closed-loop, wearable neuromodulation therapies.
∙ Develop, refine, and enhance neuromodulation products and
technologies.
∙ Explore new therapeutic applications.
∙ Establish stimulation strategy for future products.
∙ 6-10 years experience in medical device R & D.
∙ Expert knowledge of neuromodulation, signal processing, data science
and algorithms.
Contact Pat Jacobs — 805-579-0630 pat.jacobs@advancedpersonnelprofiles.com
Electrical
Engineer – Goleta, CA
As
an Electrical Engineer you will design, build, and test medical devices, as
well support the development of tooling and test fixtures for the development
and/or manufacture of medical devices. The main responsibilities of this
position include working with a cross-disciplinary team to understand the
requirements of the product and/or tooling, and then converting those
requirements into a product (whether the product be a medical device itself,
the tooling for the medical device, or test fixtures).
∙ 2-5 years experience
∙ CAD proficiency
∙ Electronics design experience in both digital and analog circuit
design.
Contact Pat Jacobs — 805-579-0630 pat.jacobs@advancedpersonnelprofiles.com
Director of
Electrical Engineering – Valencia, CA
Alfred Mann Foundation (www.aemf.org)
Primary
job duties include leading and managing the AMF EE team. As leader of the EE
team, this engineer will oversee and participate in all phases of the EE
development of medical devices from early concept through clinical use.
The
EE team is involved in all phases of product development, including circuit
design and simulation, component selection and sourcing, PCB layout, circuit
and system test, and test system and procedure development.
Education
and/or Experience:
∙ MS or PhD in Electrical Engineering and/or a related field.
∙ Experience in electronic analog and digital hardware design and
documentation.
∙ Minimum 20 years of EE experience, including 10 years of EE group
leadership experience.
∙ Medical device development under an FDA compliant quality system, or
other experience with design in a regulated industry.
Contact Pat Jacobs — 805-579-0630 pat.jacobs@advancedpersonnelprofiles.com
Staff Control
Engineer – Los Angeles, CA
Company
is growing and looking for a Sr. / Staff Control Engineer to develop
algorithms that will accurately control a miniature robot.
Responsibilities:
∙ Develop control algorithms that accurately and robustly propel the
miniature robot.
∙ Optimize control algorithm to minimize energy use.
∙ Conduct physical experiments and iteratively improve control
algorithm based on experimental findings.
∙ Work with a team of electrical, mechanical and control engineers to
develop clear understanding of required coil properties/location/current to
generate specific magnetic fields, using Python based simulation software.
∙ Provide input to potential design improvements on both hardware
(coil-design, coil-locations, voltage level) and software (filtering, control
algorithms).
∙ Support and/or lead control algorithm development.
Qualifications:
∙ MSc in Mechanical Engineering, Electrical Engineering, Computer
Science or equivalent.
∙ A minimum of 8 years of experience working on robotics or other
complex electromechanical systems requiring physics-based modeling.
∙ Vast programming experience in C++, Python, Rust or Matlab/Simulink.
∙ Extensive hands-on experimental experience, using sensors, DAQ,
signal generators, controllers.
Contact Pat Jacobs — 805-579-0630 pat.jacobs@advancedpersonnelprofiles.com
Sr. Software
Development - Test
The
Software Test Engineer’s primary responsibility is to ensure the reliability
of the medical device software and to ensure the software satisfies its
requirements.
Duties
and responsibilities:
∙ Develop unit tests using unit test software package.
∙ Develop integration tests for the device software via manual and/or
automated means.
∙ Develop, execute, and report system-level tests for the device
system.
∙ Development of test fixtures for engineering and manufacturing.
Qualifications:
∙ 10+ years of experience in embedded C development and/or testing in
safety-critical systems.
∙ Experience with software in Class II or Class III medical ices.
∙ Experience with regulated software development processes, especially
IEC 62304.
∙ Able to easily collaborate with responsible design engineers.
∙ Prefer experience with Azure Dev-Ops or similar environments.
∙ Prefer experience with static analysis tools and automated unit test
environments such as Parasoft C++ Test.
Contact Pat Jacobs — 805-579-0630 pat.jacobs@advancedpersonnelprofiles.com
C-Wave
Providing Sales Support in California
since 1996
RF/Microwave
Field Sales Engineer – North LA, Ventura and Santa Barbara Counties
C-Wave
is a premier Manufacturer’s Representative covering So CA and So NV. We have
an opening for a highly motivated outside technical sales person. The ideal
candidate must live in the territory and will regularly spend more than half
their working time away from the office. This “hunter” will be a creative
professional who is self-motivated and able to work well autonomously and as
a team member. Our sales engineers enjoy an exclusive customer base,
uncapped commissions, product and sales tool training, and mentoring.
Requirements:
∙
US Citizenship
∙ Minimum 3-5 years of experience in Technical Sales or Equivalent. (Willing
to train qualified candidates)
∙ Quiet home office as C-Wave does not provide a central office.
∙ Presentable / Reliable Vehicle.
∙ Manage all aspects of sales process: prospecting, lead generation
and follow-up, customer calls/visits
∙ Become proficient in selling Test Equipment and Component lines
represented. Attend factory training and informal training sessions given by
principals during field sales activity.
∙ Develop a solid working relationship with all principals
(Manufacturers) represented and manage principal visits.
∙ Represent the Company in a highly professional and ethical manner.
∙ All recommended doses of a COVID-19 vaccine.
∙ Full background check performed.
Benefits:
∙
Flexible schedule
∙ Health insurance
∙ Health savings account
∙ Expense/Mileage/Tuition reimbursement
∙ Work from home
Compensation: $80K-$120K Salary to start,
commensurate with qualifications and experience.
How to Apply: Email resumes to: jobs@cwaveinc.com
More about C-Wave: www.cwaveinc.com
Referrals: Do you know of a potential
candidate? We are offering a $5,000 referral fee for a candidate who is
hired.
Syntesis Global
Management Consulting
Syntesis Global
introduces the “New Standard” for Creating a Culture of Excellence in
Leadership Development, Organizational Dynamics, Career Transitions and
Outplacement Services: Syntesis Global™. With over thirty years of business
experience, Syntesis Global™ offers state-of-the-art Performance Consulting
through Executive Coaching, Change Management, Team Building, Organizational
and Career Management services. Contact Rick Hernandez, President and CEO at contactus@syntesisglobal.com
|